Last Modified: 11-29-2007 1.6 A
Service Category: Engine/Hybrid System Section: Emission Control
Model Year: 2008 Model: Sequoia Doc ID: RM000002HXS00FX
Title: 3UR-FE EMISSION CONTROL: CANISTER: REMOVAL (2008 Sequoia)

REMOVAL

1. DISCONNECT FUEL TANK VENT HOSE SUB-ASSEMBLY



(a) Pull up the retainer and disconnect the vent line hose.

NOTICE:

  • Do not use any tools in this procedure.
  • Check for any dirt and foreign matter contamination in the valve and around the connector. Clean if necessary. Foreign matter may damage the O-rings or cause leaks in the seal between the valve and connector.

(b) Remove the bolt.

2. DISCONNECT NO. 1 CHARCOAL CANISTER OUTLET HOSE



(a) Disconnect the No. 1 charcoal canister outlet hose.

3. REMOVE CHARCOAL CANISTER ASSEMBLY



(a) Disconnect the charcoal canister outlet hose.

(b) Disconnect the connector.

(c) Remove the 3 bolts and charcoal canister assembly.

4. REMOVE FUEL TANK VENT HOSE SUB-ASSEMBLY



(a) Push the hose firmly toward the canister side.

(b) Pinch the hose (portion A) as shown in the illustration.

(c) Pull out the hose.

NOTICE:

  • Do not use any tools in this procedure.
  • Check for any dirt and foreign matter contamination in the canister and around the hose. Clean if necessary. Foreign matter may damage the O-rings or cause leaks in the seal between the canister and hose.

5. REMOVE CHARCOAL CANISTER BASE BRACKET



(a) Disconnect the No. 2 canister outlet hose sub-assembly.

(1) Push the hose firmly toward the canister side.

(2) Pinch the hose (portion A) as shown in the illustration.

(3) Pull out the hose.

NOTICE:

  • Do not use any tools in this procedure.
  • Check for any dirt and foreign matter contamination in the canister and around the hose. Clean if necessary. Foreign matter may damage the O-rings or cause leaks in the seal between the canister and hose.

(b) Remove the charcoal canister filter sub-assembly.

(c) Disconnect the charcoal canister outlet hose from hose clamp.

(d) Remove the hose clamp.

(e) Remove the 2 bolts and charcoal canister base bracket.

6. REMOVE CHARCOAL CANISTER SUPPORT BRACKET



(a) Remove the 2 bolts and charcoal canister support bracket.

7. REMOVE NO. 1 CHARCOAL CANISTER OUTLET HOSE



(a) Remove the No. 1 charcoal canister outlet hose.

8. REMOVE CHARCOAL CANISTER OUTLET HOSE



(a) Remove the charcoal canister outlet hose.